Intersense Station Settings

The Intersense settings for prediction, smoothing, and enhancement are reached from the main window by selecting Parameters->Station and Sensor Parameters, and then clicking Change:

Lightcraft recommends the following default settings for correct operation with the Intersense IS1200:

  • Perceptual Enhancement: 1 (setting this to 2 will cause strange horizontal sliding behaviors.)
  • Sensitivity Level: 3
  • Prediction Value: 0
  • Tip Offsets: 0, 0, 0

The sensor rotation is set from within Previzion in the Intersense/Airtrack configuration panel.

If you change any of these settings, make certain to save them in permanent memory with File->Save Current Settings from the mainĀ  menu.